Yueqing Saip Electric Co., Ltd.

S-50 Single-output Switch Power Supply

S-50 Single-output Switch Power Supply
Product Detailed

1.S-50 Single-output Switch Power Supply
2,1-50W Switch Power Supply
3,High efficiency and low operation temperature
4,CE

S-50 Single-output Switch Power Supply

Switch Power Supply, Switching Power Supply, Switch Mode Power Supply

 

 

Low price and high reliability

105 degree output capacitor

AC input power suitable for the world

High efficiency and low operation temperature

Soft-start current can reduce the AC input impact effecticly

Compact size, light weight

100% full-load bum-in test

Installed with EMI filter, minimum wave.

Product Description.

Model /Specification

S-50-5

S-50-12

S-50-15

S-50-24

DC output voltage

5V

7.5V

12V

24V

Output voltage error (Note2)

±2%

±1%

±1%

±1%

Rated output current

5A

18A

12A

6A

Output current rage

0-5A

0-2.1A

0-1.7A

0-1.1A

DC output power

25W

25.2W

25.5W

26.4W

Adjustable range for DC voltage

+10,-5%

±10%

±10%

±10%

AC input voltage range

85~264VAC/47~63VAC,120~370VDC

Input current

0.6A/115V 0.35A/230V

AC impulse current

Cold-start current 15A/115V 30A/230V

Leakage current

<0.75mA/240VAC

Overload protection

105%~150% Type,PULSING HICCUP SHUTDOWN, Reset, auto recovery

Temperature coefficient

±0.03%°C(0~50°C)

Vibration

10~500Hz,2G 10min./1cycle,Period for 60min,Each axes

Withstand voltage

Input and output interval,3KVAC,Input and enclosure,1.5KVAC,Output and enclosure,0.5KVAC

Isolation resistance

Input and output interval,Input and enclosure,Output and enclosure,0500VAC/100M Ohms

Working temperature and humidity

-10°C~+60°C,20%~90%RH

Store temperature and humidity

-20°C~+85°C,10%~95RH

Overall dimension

99*97*35mm

Weight

0.37Kgs

Note:1.The testing condition for the parameter above is:230VAC input, rated load,25°C 70%Rh,Humidity
2.Error,include the setting error, line stability and load stability.(Note,5)
3.Wave test:adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting
4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.
5.Load stability test,The load is from 0% to 100%,others 60%.
6.C2,3,11must be knocked down.

 



Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.