- Auto Lighting System[1]
- Other Auto Electronics[1]
- Cleaner & Wash[1]
- Other Car Cleaning Tools[1]
- Tire Gauges[2]
- HVAC Systems & Parts[6]
- Radio[4]
- Rechargeable Batteries[20]
- Solar Cells[20]
- Connectors[20]
- Electrical Plugs & Sockets[13]
- Electronic & Instrument Enclosures[20]
- Alternative Energy Generators[20]
- Other Electrical Equipment[4]
- Power Distribution Equipment[1]
- Inverters & Converters[20]
- Switching Power Supply[20]
- Relays[20]
- Sensors[20]
- Other Electronic Accessories[1]
- Other Electronic Components[1]
- Other Solar Energy Related Products[8]
- Solar Chargers[10]
- Solar Collectors[13]
- Solar Controllers[20]
- Solar Energy Systems[20]
- Air Purifiers[1]
- Humidifiers[20]
- Solar Water Heaters[19]
- Water Filters[2]
- Dimmers[1]
- Garden Lights[5]
- Solar Lamps[2]
- Street Lights[20]
- Underground Lamps[3]
- Flashlights & Torches[12]
- Arc Welders[20]
- Energy Meters[2]
- Flow Sensors[1]
- Lenses[20]
- Temperature Instruments[3]
- Calculator[2]
- Smoke Detector[20]
T Series Triple-output Switch Power Supply
1.T Series Triple-output Switch Power Supply
2,30W-100W Switch Power Supply
3,110/220VAC input switch power supply
4,CE
T Series Triple-output Switch Power Supply
Switch Power Supply, Switching Power Supply, Switch Mode Power Supply
Model Performance | T-100C | T-100D | ||||
CH1 CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | |
DC output voltage | 5V | 15V | -5V | 5V | 12V | 24V |
Output Voltage Tolerance (Note 2) | ±2% | ±6% | +2,-10% | ±2% | +6% | ± 6% |
Rated output current | 10A | 2.5A | 1A | 6A | 2A | 2A |
Output Current Range | 2 -12A | 0.2 -2.5A | 0.1 -1A | 2-12A | 0.1 -2A | 0.2 -2A |
Ripple and noise (Note 3) | 80mVp-p | 150mVp-p | 150mVp-p | 80mVp-p | 150mVp-p | 150mVp-p |
Into the line of stability (Note 4) | ±0.5% | ±1% | ±1% | ±0.5% | ±1% | ±1% |
Load stability (Note 5) | ±1% | ±5% | ±5% | ±1% | ±5% | ±5% |
DC output power | 100W | 102W | ||||
Efficiency | 80% | 79% | ||||
DC voltage adjustable range | CH1:+10,-5% | CH1:+10,-5% | ||||
Input Voltage Range | 85 ~ 132VAC/170 ~ 277VAC Selected by switch 47 ~ 63Hz; | |||||
AC input current | 2.5A /115V , 1.25A /230V | |||||
Inrush Current | Current 30A/115V 60A/230V cold start | |||||
Leakage | <0.5mA/240VAC | |||||
Overload | 105% ~ 150% Type: FOLDBACK cut output Recovery: recycle AC ON / OFF | |||||
Over Voltage Protection | …… ... ... | |||||
Temperature Protection | …… ... ... | |||||
Temperature Coefficient | ± 0.03%/ °C (0 ~ 50°C ) ON+5V OUTPUT | |||||
Start, rise, hold time | 200ms,50ms,16ms | |||||
Earthquake resistance | 10 ~ 500Hz, 2G 10min. / 1 cycle, duration 60 minutes, each axis | |||||
Pressure of | Between input and output: 1.5KvAC, input and shell: 1.5KvAC, output and shell: 0.5KvAC | |||||
Isolation Resistance | Input and output, input and shell, shell and output: 500VDC/100M Ohms | |||||
Temperature, humidity | -10°C~ + 60°C , 20% ~ 90%RH | |||||
Storage temperature, temperature | -20°C ~ + 85°C ,10% ~ 95%RH | |||||
Dimensions | 199*110*50mm | |||||
Weight | 0.83Kgs | |||||
Safety Standards | To meet the UL1012 REQUIREMENT (NOT QPPLY FOR THE MARK) | |||||
EMC Standards | To meet the FCC PART15 J CONDUCT 10N CLASS A |
Notes:
1 The above parameters test conditions are: 100-230VAC input, rated load, 25 °C 70% RH. Humidity.
2 Tolerance: includes set up tolerance, line stability, load stability (Note 5).
3 The ripple test: 20MHz with A12 "twisted pair, interrupted with 0.1uF & 47uF capacitor short-circuit.
4 Into the line voltage stability test: full load into the line of the minimum voltage to maximum voltage.
5 Load stability test: the load from 0% to 100%, and other output at 60% rated load.
6 The output of up to maximum current, but the overall load can not exceed the maximum output power.